AI-Thinker ESP12-E 32Mbit Flash

3,82 

Der ESP-12E basiert auf dem ESP-12, jedoch in erweiterter Funktion. Bei dem Standard ESP-12 (Vorgängerversion) wurde noch der Winbound W25Q32BV SPI Flash mit 4Mbit eingesetzt.

The ESP-12E is an extended Version of the ESP-12. Within the basic ESP-12 (previous version) Winbound W25Q32BV SPI Flash with 4 Mbit was used.

Lieferzeit: sofort

30 vorrätig

EAN Code 4260633297727 Artikelnummer: 282084820820 Kategorie: Schlagwörter: , , , , ,

Beschreibung

Original AI-Thinker ESP12-E 32Mbit Flash WLan Wifi Modul ESP-12 extended Version

Original AI Thinker ESP-12E © androegg

ESP-12E extended Version © androegg

ESP-12E Pinout

ESP-12E Basic Pin assignment © androegg

ESP-12E Basic Pin assignment © androegg

Der ESP-12E basiert auf dem ESP-12, jedoch in erweiterter Funktion. Bei dem Standard ESP-12 wurde noch der Winbound W25Q32BV SPI Flash mit 4Mbit eingesetzt.

Zusätzlich wurden beim ESP-12E 6 weitere Pins des ESP8266EX ausgeführt, sodass nun 6 weitere Pins zur Verfügung stehen. Dies ermöglicht beispielsweise gleich 2 SPI Schnittstellen simultan, ohne Erweiterung zu betreiben.

 

Zu beachten:

Die zusätzlichen 6 Pins können mittels dem typischen I/O Adapter nicht direkt angeschlossen werden.

Um den ESP-12E zu betreiben werden folgende Bauteile benötigt:

  • 3 Widerstände
  • 3,3 Volt Netzteil min. 500mA
  • USB TTL Konverter

The ESP-12E is an extended Version of the ESP-12. Within the basic ESP-12 Winbound W25Q32BV SPI Flash with 4 Mbit was used.

Additionally ESP-12E has 6 more Pins compared to basic ESP-12. Within those extended Pin Row you can easiely run 2 SPI Interfaces without any hardware extension.

 

Notes:

The extended Pin Row is not supported by typical I/O Adapter.

For operating an ESP-12E Peripherie as follows requiered:

  • 3 Resistors
  • 3,3 Volt Power Supply min. 500mA
  • USB TTL Converter

ESP-07 Features:

  • CPU / MPU:
    • Frequency: 80 / 160 MHz.
    • Risk: 32-bit
    • Instruction Ram: 64 Kb
    • Data Ram: 96 Kb
  • SPI Flash:
    • Flash memory: 32Mb
    • clock frequency: 75 MHz.
    • Page program: up to 256 bytes in 0.64ms (TYP)
      Sector erase: 512Kb in 0.6s
    • Bulk erase: 17 – 23 s
    • Hardware write protection: protected area size defined by nonvolatile bits BP0, BP1, BP2
    • Deep power-down: 1μA (TYP)
    • Write Cycles: > 100,000 write cycles per sector
      Data retention: > 20 Years
  • 802.11 b/g/n protocol
  • supports Wi-Fi Direct (P2P)
  • soft-AP Integrated TCP/IP protocol stack
  • integrated PCB Antenna
  • +19.5 dBm output power in 802.11b mode
  • Power down leakage current of < 10uA
  • Integrated low power 32-bit MCU
  • supported Interface
    • SDIO 2.0
    • SPI
    • UART
    • STBC
    • MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

Zusätzliche Informationen

Gewicht 4 g
Größe 19 × 16 × 4 mm

ESP-12E Datenblatt

ESP-12E Data Sheet

Technical Informations:

ESP8266 ESP-12E extended Version 32Mbit / 4096KB SPI Flash

ESP-12F Features:

  • 802.11 b/g/n protocol
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • +20.0 dBm output power in 802.11b mode
  • Power down leakage current of < 10uA
  • Integrated low power 32-bit MCU
  • SDIO 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

ESP-12E Dimensions:

length 24 mm
width 16 mm
height 4 mm
weight 3 gr.

ESP-12E Electrical Features:

Parameter Symbol min. max. Unit
InputLow voltage Vil -0.3 0.25xViO Volt
InputHighVoltage Vih  0.75xVio

3,3

Volt
InputLeakageCurrent lil

50

nA
OutputLowVoltage Vol 0.1 xVio Volt
OutputHighVoltage Voh 0.8xVio Volt
InputPinCapacitance Cpad

VDDIO

5 pF Farad
Vio 1.8 3.3 Volt
MaximumDriveCapability Imax 12 mA Ampere
Temperature Tamb

-40

+125 °Celsius

ESP-12E Processor:

Parameter Symbol
CPU / MPU Vil
Frequency 80 / 160 MHz.
Risk 32-bit
Instruction Ram 64 Kb
Data Ram 96 Kb

ESP-12E SPI Flash:

Parameter Symbol
Flash memory 32Mb
clock frequency 75 MHz. max.
Supply Voltage 2.7 – 3.6 Volt
Page program up to 256 bytes in 0.64ms (TYP)
Sector erase 512Kb in 0.6s
Bulk erase 17 – 23 s 
Hardware write protection protected area size defined by nonvolatile bits BP0, BP1, BP2
Deep power-down 1μA (TYP)
Electronic signature JEDEC-standard 2-byte signature (2016h)
Unique ID code (UID) and 16 bytes of common Flash interface (CFI)
RES command, one-byte signature (15h) for backward-compatibility
Write Cycles > 100,000 write cycles per sector
Data retention > 20 Years
RoHS-compliant Packages  SO8W (MW) 208 mils
SO16 (MF) 300 mils
VFQFPN8 (MP) MLP8 6mm x 5mm
VFDFPN8 (MP) MLP8 8mm x 6mm

ESP-12E Wifi Receiver Sensitivity:

Parameter MIN: TYP. MAX. Unit
Input frequency

2412

2484

MHz.
Input impedance

50

Ω
Input reflection

-10

dB
Output power of PA for 72.2Mbps

14

15

16

dBm
Output power of PA for 11b mode 17.5 18.5 20.0 dBm

Sensitivity

CCK 1Mbps

-98

dBm
CCK 11Mbps

-91

dBm
6Mbps(1/2BPSK)

-93

dBm
54Mbps(3/4 64-QAM)

-75

dBm
HT20MCS765Mbps72.2Mbps

-71

dBm
Adjacent Channel Rejection
OFDM6Mbps

37

dB
OFDM54Mbps

21

dB
HT20MCS0

37

dB
HT20MCS7

20

dB

Current Consumption

Send 802.11bCCK 1MbpsPout=+24.5dBm

215

mA
Send 802.11bCCK 1MbpsPout=+22.5dBm

197

mA
Send 802.11bCCK 1MbpsPout=+ 20.0dBm

145

mA
Send 802.11bCCK 11MbpsPout=+18.5dBm

135

mA
Receive 802.11bLength 1024 Byte-80dBm

100

mA
Receive 802.11gLength 1024 Byte-70dBm

100

mA
Receive 802.11nLength 1024 Byte-65dBm

102

mA
Standby

70

mA
Power Down 0.5 μA

ESP-12E Pinout Table Function Espressif / NodeMCU

PIN ID Function Description / Mode

1

RST Reset (10 KΩ Resistor to Ground) NC / external MCU Control

2

ADC/TOUT 10 bit Analog Digital Converter Input from 0-1 Volt

3

EN Module / Chip (10 KΩ Resistor to 3,3 Volt recommended)

4

GPIO16 GPIO Low / High Level wake up (see documentation deep sleep)

5

GPIO14 GPIO Low / High Level HSCLK

6

GPIO12 GPIO Low / High Level HMISO

7

GPIO13 GPIO Low / High Level RXD2 HMOSI

8

VDD 3,3 Volt input

9

CS0 CS0 Chip selection of SPI Interface

10

MISO MISO of SPI Interface

11

GPIO9 not available

12

GPIO10 not available

13

MOSI MOSI of SPI Interface

14

SCLK Clock of SPI Interface

15

GND Ground

16

GPIO15 GPIO Low / High Level TXD2 HCS

17

GPIO2 GPIO Low / High Level

18

GPIO0 Flash Mode (10 KΩ Resistor to Ground) GPIO Low / High Level

19

GPIO4 GPIO Low / High Level

20

GPIO5 GPIO Low / High Level

21

RXD0 RXD0

22

TXD0 TXD0
ESP-12E Datenblatt (4677 Downloads)

ESP-12E Pinout

ESP8266 ESP-12E-Pinout
ESP8266 ESP-12E-Pinout

ESP-12E Anschluss Belegung

ESP-12E Anschlussbelegung ohne I/O Adapter

ESP-12F Anschlussbelegung ohne I/O Adapter
ESP-12E Anschlussbelegung ohne I/O Adapter

ESP-12E Anschlussbelegung mit I/O Adapter

ESP-12F schematische Anschlussbelegung
ESP-12E schematische Anschlussbelegung

Bewertungen

Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „AI-Thinker ESP12-E 32Mbit Flash“

Das könnte dir auch gefallen …

Anmelden