Internet of Things ESP8266 ESP-07 Board
Internet of Things ESP8266 ESP201 wireingESP-07 mit 8 Mbit FlashESP-07 DetailansichtESP8266 I/O AdapterESP8266 I/O Adapter DetailansichtESP07 I/O Adapter AnschlussbelegungInternet of Things ESP8266 WiderstandInternet of Things ESP8266 ESP-07 Board

ESP8266 ESP-07 Board

8,48 

AI Thinker ESP8266 ESP-07 Board fertig verlötetet und getestet.

AI Thinker ESP8266 ESP-07 Board soldered and tested.

Nicht vorrätig

Art.-Nr.: 282248827953 Kategorie: Schlüsselworte: , , , , , ,

Produktbeschreibung

ESP8266 ESP-07 Board verlötet soldered 8Mbit Flash +25 dBM inkl. 3×10 3×3.9 3×3.3 KΩ

ESP8266 ESP-07 Board © androegg

Original ESP-07 8 Mbit Flash © androegg

AI Thinker ESP-07 details © androegg

3dBi Antenne RP-SMA male + I-PEX Adapter

ESP-07 wireing © androegg

ESP-07 wireing © androegg

ESP8266 I/O Adapter © androegg

ESP8266 I/O Adapter Detail © androegg

ESP8266 I/O Adapter

ESP8266 ESP-07 Resistor set © androegg

 

AI Thinker ESP8266 ESP-07 Board fertig verlötetet und getestet. Im Lieferumfang

  • 3 Stück 3×3.3 KΩ Widerstände
  • 3 Stück 3×3.9 KΩ Widerstände
  • 3 Stück 3×10 KΩ Widerstände
  • 1 Stück Original AI Thinker ESP-07 aktuelle Version mit 8Mbit Flash
  • 1 Stück ESP8266 I/O Adapter

enthalten.

Der ESP8266 mit I-PEX Anschluss zum Betrieb einer externen Antenne.

Zu beachten:

Der hier angebotene ESP-07 ist ein original AI Thinker mit richtiger Pinbelegung (siehe unser Datenblatt).

Um den ESP-07 zu betreiben werden folgende Bauteile benötigt:

  • 3,3 Volt Netzteil min. 500mA
  • USB TTL Konverter

AI Thinker ESP8266 ESP-07 Board soldered and tested including

  • 3 Piece 3×3.3 KΩ Resitors
  • 3 Piece 3×3.9 KΩ Resistors
  • 3 Piece 3×10 KΩ Resistors
  • 1 Piece Original AI Thinker ESP-07 aactual Version 8Mbit Flash
  • 1 Piece ESP8266 I/O Adapter

The ESP8266 with I-PEX socket for connecting an external Antenna.

Notes:

This is an original AI Thinker ESP-07 with correct Pinout (see our Data Sheet).

For operating an ESP-07 Peripherie as follows requiered:

  • 3,3 Volt Power Supply min. 500mA
  • USB TTL Converter

Weitere Informationen

Gewicht 11 g
Größe 28 x 32 x 16 mm

Datenblatt

ESP8266 ESP-07  8Mbit 1024 KB SPI Flash Technical Informations:

ESP8266 ESP-07 is similar with ESP12 but  with amplified Antenna output up to 25.0 dBm, also I-PEX connector for external Antenna.

ESP-07 Features:

  • 802.11 b/g/n protocol
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • I-PEX Antenna Connector
  • +24.5 dBm output power in 802.11b mode
  • Power down leakage current of < 10uA
  • Integrated low power 32-bit MCU
  • SDIO 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

ESP-07 Dimensions:

length 20 mm
width 16 mm
height 4 mm
weight 4 gr.

ESP-07 Electrical Features:

Parameter Symbol min. max. Unit
InputLow voltage Vil -0.3 0.25xViO Volt
InputHighVoltage Vih 0.75xVio

3,3

Volt
InputLeakageCurrent lil

50

nA
OutputLowVoltage Vol 0.1 xVio Volt
OutputHighVoltage Voh 0.8xVio Volt
InputPinCapacitance Cpad

VDDIO

5 pF Farad
Vio 1.8 3.3 Volt
MaximumDriveCapability Imax 12 mA Ampere
Temperature Tamb

-40

+125 °Celsius

ESP-07 Processor:

Parameter Symbol
CPU / MPU Vil
Frequency 80 / 160 MHz.
Risk 32-bit
Instruction Ram 64 Kb
Data Ram 96 Kb

ESP-07 SPI Flash:

Parameter Symbol
Flash memory 8Mb
clock frequency 75 MHz. max.
Supply Voltage 2.7 – 3.6 Volt
Page program up to 256 bytes in 0.64ms (TYP)
Sector erase 512Kb in 0.6s
Bulk erase 17 – 23 s
Hardware write protection protected area size defined by nonvolatile bits BP0, BP1, BP2
Deep power-down 1μA (TYP)
Electronic signature JEDEC-standard 2-byte signature (2016h)
Unique ID code (UID) and 16 bytes of common Flash interface (CFI)
RES command, one-byte signature (15h) for backward-compatibility
Write Cycles > 100,000 write cycles per sector
Data retention > 20 Years
RoHS-compliant Packages SO8W (MW) 208 mils
SO16 (MF) 300 mils
VFQFPN8 (MP) MLP8 6mm x 5mm
VFDFPN8 (MP) MLP8 8mm x 6mm

ESP-07 Wifi Receiver Sensitivity

Parameter MIN: TYP. MAX. Unit
Input frequency

2412

2484

MHz.
Input impedance

50

Ω
Input reflection

-10

dB
Output power of PA for 72.2Mbps

14

15

16

dBm
Output power of PA for 11b mode 20.0 22.5 25.0 dBm

Sensitivity

CCK 1Mbps

-98

dBm
CCK 11Mbps

-91

dBm
6Mbps(1/2BPSK)

-93

dBm
54Mbps(3/4 64-QAM)

-75

dBm
HT20MCS765Mbps72.2Mbps

-71

dBm

Adjacent Channel Rejection

OFDM6Mbps

37

dB
OFDM54Mbps

21

dB
HT20MCS0

37

dB
HT20MCS7

20

dB

Current Consumption

Send 802.11bCCK 1MbpsPout=+24.5dBm

319

mA
Send 802.11bCCK 1MbpsPout=+22.5dBm

282

mA
Send 802.11bCCK 1MbpsPout=+ 20.0dBm

224

mA
Send 802.11bCCK 11MbpsPout=+18.5dBm

197

mA
Receive 802.11bLength 1024 Byte-80dBm

100

mA
Receive 802.11gLength 1024 Byte-70dBm

100

mA
Receive 802.11nLength 1024 Byte-65dBm

102

mA
Standby

70

mA
Power Down 0.5 μA

ESP-07 Pinout Table Function Espressif NodeMCU

PIN ID Function Description / Mode

1

RST Reset (10 KΩ Resistor to Ground) NC / external MCU Control

2

ADC/TOUT 10 bit Analog Digital Converter Input from 0-1 Volt

3

EN Module / Chip (10 KΩ Resistor to 3,3 Volt recommended)

4

GPIO16 GPIO Low / High Level wake up (see documentation deep sleep)

5

GPIO14 GPIO Low / High Level HSCLK

6

GPIO12 GPIO Low / High Level HMISO

7

GPIO13 GPIO Low / High Level RXD2 HMOSI

8

VDD 3,3 Volt input

9

GND Ground

10

GPIO15 GPIO Low / High Level TXD2 HCS

11

GPIO2 GPIO Low / High Level

12

GPIO0 Flash Mode (3.9 KΩ Resistor to Ground) GPIO Low / High Level

13

GPIO4 GPIO Low / High Level

14

GPIO5 GPIO Low / High Level

15

RXD0 RXD0

16

TXD0 TXD0

ESP-07 Datenblatt download (589 Downloads)

ESP-07 Anschluss Belegung

ESP8266 ESP-07 Anschlussbelegung ohne I/O Adapter

ESP07 Anschlussbelegung
ESP07 Anschlussbelegung

ESP8266 ESP-07 Anschlussbelegung mit I/O Adapter

ESP07 I/O Adapter Anschlussbelegung
ESP07 I/O Adapter Anschlussbelegung

Pinout

ESP8266 ESP-07 Pinout

ESP8266 ESP-07 Pinout
ESP8266 ESP-07 Pinout

Bewertungen

Es gibt noch keine Bewertungen

Schreibe die erste Bewertung zu “ESP8266 ESP-07 Board”