ESP8285 M3 Modul inkl. Pinleiste
ESP8285 M3 Modulesp8285 M3 Modul PinoutESP8285 M3 Modul PinleisteESP8285 M3 Modul inkl. Pinleiste

ESP8285 ESP-M3 Modul

4,28 

ESP8285 ESP-M3 integr. 8Mbit Flash WIFI WLan serial Modul

Lieferzeit: sofort

25 vorrätig

Produktbeschreibung

ESP8285 ESP-M3 integr. 8Mbit Flash WIFI WLan serial Modul +25 dbm low power 20µA

ESP8285 ESP-M3 Module incl. Pinheader © androegg

ESP8285 ESP-M3 Module © androegg

ESP8285 ESP-M3 with 2.54 mm Pitch © androegg

ESP-M3 Pinheader © androegg

ESP-01 Basic Pin assignment © androegg

ESP8285 ESP-M3 mit integriertem 8Mbit Flash und 6-poliger Pinleiste.

Bitte beachten:
ESP8285 müssen im dio Modus geflasht werden.

Der ESP8285 ESP-M3 unterstützt die ESP8266 SDK’s wie

  • Espressif
  • Arduino
  • NodeMCU
  • Micro Phyton
  • Espruino

 

ESP8285 ESP-M3 with integrated 8 Mbit flash and 6 Pin Header.

Note:
ESP8285 flashing requires dio mode.

Der ESP8285 ESP-M3 supports the ESP8266 SDK’s for example

  • Espressif
  • Arduino
  • NodeMCU
  • Micro Phyton
  • Espruino

ESP8285 ESP-M3 Features:

  • CPU / MPU:
    • Frequency: 80 / 160 MHz.
    • Risk: 32-bit
    • Instruction Ram: 64 Kb
    • Data Ram: 96 Kb
  • SPI Flash:
    • Flash memory: 8Mb
    • Page program: up to 256 bytes in 0.7ms (TYP)
    • Sector erase: 512Kb in 150ms
    • Chip erase: 10s
    • High Speed Clock Frequency:
    • -120MHz for fast read with 30PF load
    • -Dual I/O Data transfer up to 180Mbits/s
    • -Quad I/O Data transfer up to 360Mbits/s
    • Deep power-down: 5μA (MAX)
    • Write Cycles: > 100,000 write cycles per sector
      Data retention: > 20 Years
  • 802.11 b/g/n/e/i protocol
  • supports Wi-Fi Direct (P2P)
  • soft-AP Integrated TCP/IP protocol stack
  • integrated PCB Antenna
  • +25 dBm output power in 802.11b mode
  • Power down leakage current of < 5uA
  • low Power consumption 25µA deep sleep
  • Integrated low power 32-bit MCU
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Small form factor 26.8mm x 16mm (incl. Pinheader)

 

 

Das könnte dir auch gefallen…